How to choose the suitable 5022 and 5024 sprinkler?

We have the different kinds available for the sprinkler of that series, we choose by many characteristics:

First, the key point is the connection size, it is available in the female thread connection of 1/2” and 3/4”, 1/2”male thread connection is the most used connection size, it can suit on the female thread sprinkler stand set directly;
Also available in the connection 1/2” female and 3/4” female by added with the size change connector, so the sprinkler can be installed on the male thread riser pipe directly!

Second, the nozzle size, the nozzle will influence the water flux and the shoot radius, the bigger size of the nozzle, the bigger flux will be, detailed data please check the upper parameter sheet;
There are two nozzles work at same time for the 5022 type, with main nozzle and second nozzle, main nozzle available in different size for choice: 2.5mm, 2.8mm, 3.0mm, 3.2mm, 3.5mm, 4.0mm; the second nozzle with standard shape star shape, which will disperse the water for closer area, the second nozzle also can be chosen to be the plug nozzle, and only main nozzle work;
For the 5024 sprinkler, in the low angle type, which only work with one nozzle, and nozzle size available with different size for choice;

Third are some accessories, like the extra nozzle, customer can by the nozzles for replace to suitable different irrigation situation and for different plants or working environment.

Also can be chosen with the top cap or without the cap, we more recommend with the cap, the cap with the function for protecting the spring, when the working environment is bad with weed, and the weed will influence the sprinkler, cap is the protector for the spring, and guarantee the spring can work smoothly;
The water diffuser for the main nozzle, the impact arm with the goods function to make the water from the nozzle been disperse, when added with the water diffuser plate, the water will be more uniform, more suitable for the closer irrigation area, and more suitable for the smaller plants;

But how to choose the sprinkler between 5022 and 5024?

The most difference between two kinds is the elevation angle,
5022 in the standard angle, suitable for most working environment and plants;
5024 in the super low angle, with the low elevation angle of 12 degree with low trajectory and single nozzle design, it suitable for under tree irrigation, like banana irrigation, orchard, and plantation or any other full coverage irrigation, with shoot radius 8-12 meters, smooth slanted planes minimize breakage caused by the accidental impact, or suitable for the area with the wind;
Then it is the difference for the nozzle, 5022 with 2 nozzles, 5024 with only one nozzle, that also the key points for the flux.
The advantage to choose the 5022/5024 sprinkler,
 
Made by new material of POM engineering plastic, stainless steel spring, TPE gasket, good material supply with longer service time!
The design of it reduced sensitivity to clogging and higher resistance to wind, designed for short irrigation cycles for germination, and high impact and heavy-duty plastic materials for resistance to corrosion, chemicals and radiation; with high anti-wearing resistance, longer service life; the requirement of water quality is relatively low; precision design, precision manufacturing, spray evenly; easy for installation and maintenance, it is time-saving and water saving, economical and practical;